The latest G928FXXS5CRH1 Android 7.0 Nougat firmware is now available for the Samsung for Galaxy S6 Edge+ SM-G928F. Samsung rolled out this new firmware with August 2018 security patches. You can download G928FXXS5CRH1 Android 7.0 Nougat firmware from below to update manually. Also if your Galaxy S6 Edge+ SM-G928F is still running on Android 7.0 Nougat then use this G928FXXS5CRH1 firmware to update it to Android 7.0 Nougat. The new firmware comes with August 2018 security patches and has several system tweaks that improve overall performance. You can navigate to OTA (Over-the-air) update system / Samsung KIES to upgrade your device to update your Galaxy S6 Edge+. But if you have not yet received the OTA notification then follow the given guide.
Samsung Galaxy S6 Edge+ is an amazing smartphone which is popular among the selfie lovers. This phone comes with a 5.7 inches Super AMOLED display with a screen resolution of 1440 x 2560 pixels. Galaxy S6 Edge+ has an Exynos 7420 Octa-core SoC and 4GB of RAM. Galaxy S6 Edge+ is available with 32 and 64GB internal memory. This phone features a 16MP rear camera and 5MP front shooting camera. The smartphone running on Android 5.1.1 Lollipop out of the box and packed with a non-removable Li-Ion 3000 mAh battery.
Keep in mind that G928FXXS5CRH1 is a completely unbranded firmware, thus you should not get any pre-installed apps or extra language packs with this. In this guide, we’ll use ODIN flashing tool to install Android 7.0 Nougat on Galaxy S6 Edge+. So go ahead and follow the given step-by-step guide carefully. Don’t forget to take proper backup of all your important data before proceeding to install G928FXXS5CRH1 Android 7.0 Nougat August 2018 Security Patch.
- 1 Download G928FXXS5CRH1 Android 7.0 Nougat Firmware:
- 2 Update Galaxy S6 Edge+ to G928FXXS5CRH1 Android 7.0 Nougat:
This guide containing the G928FXXS5CRH1 Android 7.0 Nougat firmware and instructions are working with Galaxy S6 Edge+ only. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device before proceeding to the installation guide.
G928FXXS5CRH1 Android 7.0 Nougat Firmware Detail
- Device Name: Galaxy S6 Edge+
- Model Number: SM-G928F
- Baseband Version: G928FXXS5CRH1
- Security Patch Level: 01.08.2018
- Android OS: 7.0
AndroidXDA.net will not responsible for any kind of damage occurred to your Samsung Galaxy S6 Edge+ during or after the installation of Android 7.0 Nougat. Proceed at your own risk.
- Make a proper backup of all the existing data and settings of your Galaxy S6 Edge+, in case anything goes wrong then you’ll be able to restore your data back.
- Verify that you’ve properly installed the Galaxy S6 Edge+ USB Drivers on the PC.
- Enable USB Debugging Mode on your J7 by navigating to Settings > Developer Options > check the USB Debugging option.
- If you have a custom ROM installed on the phone, then after the installation of the stock update it will be lost.
- The custom recovery will be replaced by the stock version.
- If the Galaxy S6 Edge+ is rooted then after installing the official firmware, it will no longer belong to a rooted version.
- Make sure that the battery level of your phone is about 70% to avoid unexpected shutdowns while installing the ROM.
Download G928FXXS5CRH1 Android 7.0 Nougat Firmware:
Steps: How To Update Galaxy S6 Edge+ SM-G928F via OTA
- Connect your device with a stable internet connection (Wi-Fi or data network).
- Navigate to Android app drawer and tap on Settings.
- Next, locate About Device and tap on it.
- Choose Software Update from About Device.
- Tap on Update option.
- If the update is available then you can see an update, press OK to download and install.
- Once the download completes, your device will reboot to complete the installation process.
Steps: How To Update Galaxy S6 Edge+ SM-G928F via Samsung Kies
- Ensure that you have a stable internet connection (WiFi) on your PC.
- Download and install Samsung Kies on your computer.
- Power ON the phone and then connect it to a PC using its USB cable.
- Run Samsung Kies and wait for it to detect your phone.
- If a new firmware is available then you will see that a new firmware upgrade is available at Samsung Kies home screen.
- Now, press the Firmware Upgrade button to proceed.
- Finally, follow the on-screen instruction and your device will run upgrade and reboot automatically. Disconnect your device from a PC after the process completes.
Update Galaxy S6 Edge+ to G928FXXS5CRH1 Android 7.0 Nougat:
1:– First, download G928FXXS5CRH1 Security Patch and Odin v3.09 for Galaxy S6 Edge+ on the desktop of your PC and extract the .zip files.
2:– Turn OFF your Galaxy S6 Edge+ in order to boot into Download Mode.
3:– Turn the device ON by pressing and holding the Volume Down + Home keys at the same time and then press the Power button until the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.
4:– Launch Odin tool on your PC as an Administrator and plug your phone into your PC while your phone is in the Download Mode.
5:– One of the ID:COM boxes will turn yellow with the COM port number once the phone is connected successfully.
6:– Select the firmware files that you want to flash on your Galaxy S6 Edge+. (Already extracted in Step No 1)
Click on ‘AP’ and select file with ‘AP’ in its name.
Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
7:– In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked but the Re-Partition option should be unchecked.
8:– Click on the Start button in Odin to initiate the installation process. It will take a few minutes to complete.
9:– Once the process of installation successfully completes, the Galaxy S6 Edge+ will restart. Unplug the phone after you see the home screen.
Fix Boot Loop Issue On Galaxy S6 Edge+ SM-G928F
In case your Galaxy S6 Edge+ SM-G928F stuck at booting for more than 10 minutes after the installation process then follow the given instructions:
- First, boot your device into Recovery Mode by pressing and holding the Volume Up + Home + Power buttons at the same time.
- Then perform Wipe data/Factory Reset and Wipe Cache Partition task. After that select Reboot System Now.
In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Done! these were the instructions to install G928FXXS5CRH1 Android 7.0 Nougat on Galaxy S6 Edge+. Let us know in the comments area below if you have any question or issues.